Blank Craft Supplies for Personalization.Heavy Equipment & Agricultural Supplies.Note: Slip resistance meets or exceeds standard, (ASTM D 2047-11) James Machine 0.5 minimum. Apply 1 - 2 coats of finish as directed above. Floor surface must be clean, dry and free of residue before finish is applied. Top scrub the floor using Daily Scrub SC and maroon pad to remove the top soiled layers of finish. INTERIM MAINTENANCE: Sweep large debris and dust mop. Use Betco® One Step High Speed Cleaner/Restorer to condition the floor and extend the time between top scrub and recoating. Buff or burnish the floor to enhance gloss as needed. Damp mop or automatic scrub using a Betco floor cleaner. ROUTINE MAINTENANCE: Sweep large debris and dust mop. Note: This product is a self-sealing finish, however, if tile is old, worn or porous, initially applying 1 - 2 coats of a Betco sealer will enhance gloss and long term performance. A minimum of 4 coats of finish is recommended. Elevated temperatures, heavy coats and humidity may extend dry time. Allow each coat to dry thoroughly before applying additional coats, usually 20 - 30 minutes. Apply finish in uniform, thin to medium coats using a clean synthetic finish mop, microfiber mop or applicator system.

RESTORATIVE MAINTENANCE: Completely remove all old wax, finish and soil from floor surface following strip procedure instructions on Betco® stripper label. Recommended for use on all types of resilient tile flooring and properly prepared hard surfaces.

Betco ax it plus